1 8

Suits Toyota Yaris GR / Cross GEN 1 (2020-2023) Fire Extinguisher Bracket

Suits Toyota Yaris GR / Cross GEN 1 (2020-2023) Fire Extinguisher Bracket

$63.00 USD
$70.00 USD $63.00 USD
On Sale

Protect your car and stop your fire extinguisher from rolling around the cabin. Precision laser-cut from 3mm Australian steel with a durable powder coat, this bracket keeps your extinguisher locked down solid, instantly accessible when seconds count. Bolts straight on the existing factory seat mounts with zero drilling required. Ideal setup for track days, off-road 4x4s, fleet vehicles, or your daily drive.
  • Made in Australia
  • Free Shipping AU & NZ
  • Model-specific
  • Are these Motorsport Australia approved / legal in racing?

    Yes these are manufactured to Motorsport Australia Specifications. Schedule H 1:1.  HAND-HELD FIRE EXTINGUISHERS: (i) Each hand-held fire extinguisher shall be secured using a metal bracket attached to the automobile with only high tensile bolts or equivalent fasteners and must remain restrained under a deceleration or acceleration of 25G ; and (ii) must be capable of removal by the driver (or crew, where applicable) without the aid of tools. Our brackets are made out Steel and they are supplied with M5 High Tensile Nuts and Bolts and are designed to be attached to the vehicle via the factory High Tensile Factory bolts. 

  • Are these hard to install?

    No these are very easy to install. They can be installed with simple hand tools in only minutes. We provide detailed video instructions for most of our brackets too.

  • Do these cause any damage to the vehicle?

    No not at all. These are all designed to be easily installed and easily removed if the vehicle is sold later on.

  • My model isn't listed, can you make one?

    Often, yes. We're always adding new models. Our workshop is based in Somerville, VIC, about 50km from Melbourne's CBD, where we measure the vehicle in person and develop a bracket to suit. Unfortunately we're not able to design new brackets from photos alone, so we do need access to the vehicle to measure it properly.

    If you're not based in Victoria, a good option is to see if you know someone with the same model who's nearby and could bring their car in for us to measure. Some customers have organised this through car clubs or owner groups.

    Fill in the details on the contact page.

View full details

Fire Extinguisher Bracket designed for the Toyota Yaris GR and Cross from 2020 to 2023! 🧯🔥

 The 2024+ model is different.

Protect your car from a fire with a fast and easy to access fire extinguisher. Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle's bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.

Quick and easy install in 5 minutes.

⚠ NOTE: This product may restrict full seat travel. Adjust the seat with care after installation.

Please watch the install video.

 

Included in your Suits Toyota Yaris GR / Cross GEN 1 (2020-2023) Fire Extinguisher Bracket purchase:

Kap Industries [product-name]
Kap Industries Suits Toyota Yaris GR / Cross GEN 1 (2020-2023) Fire Extinguisher Bracket

1x Bracket

M5 High Tensile Steel Locknuts
M5 High Tensile Steel Locknuts

2x Locknuts

M5 High Tensile Steel Hex Bolts
M5 High Tensile Steel Hex Bolts

2x Hex Bolts

M5 Flat Washers
M5 Flat Washers

2x Flat Washers

Sticker
Sticker

1x Sticker

Lifetime Guarantee
Lifetime Guarantee

On all brackets

AUSTRALIAN OWNED AND MADE

Since 2014, our goal at Kap Industries is to encourage everyone to be more safety-conscious while on the roads – whether it be off-road, on the track or just out and about and to always be ready in case of an accident, fire or emergency.

12+

Years in Business

45k

Brackets Sold

20+

Countries Shipped

200+

Car Models Developed

<span>AUSTRALIAN</span> OWNED AND MADE
  • 5 stars: 7 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
Some of the reviews shown are from related products the merchant grouped with this one.
J
Jason Rhodes
Great service and fit

Item was delivered quickly and fits well

M
Matt Ashford
GR Yaris extinguisher mount

Perfect fit and easy install

P
Philip Challinor
Yaris cross bracket

Prompt delivery. The bracket fitted perfectly. Fortunately I had the correct torx fitting so installing the bracket was very easy. There is ample clearance between the fitted extinguisher and the seat to avoid finger crush when adjusting the seat. As I have fitted extinguishers to my vehicles for over 40 years this is a great way to achieve a result without drilling into unknown parts of the vehicle. As a former fire fighter I have seen numerous vehicles saved by a 1kg extinguisher being used initially. Thanks

B
Brett Sanders
Bracket for Toyota Yaris Cross

Finally fitted my bracket & it's better than what I expected. My fire extinguisher is now easily accessible under the driver's seat & is so inconspicuous that it seems like it was designed for it by Toyota. Well done! I am impressed & would highly recommend to any other Yaris Cross owner.

D
Darren Masters
Won’t fit Gen 2

This won’t fit a Gen 2
Wasn’t clearly stated on the web site (my car is a 2024).
Full refund offered.
Great after sales service.
Can’t recommend highly enough

M
Mitchell Keley
Highly recommend

Fits like OEM and tucks the fire extinguisher nicely under the passenger seat while maintaining full range of movement. Made nicely and of course Australian made.

C
Christian Basic
Amazing

Looks great and most importantly works and fits perfectly