4.9/5 based on 1338 Reviews

PROTECT YOUR PRIDE AND JOY

Complete in-car fire safety solution. Built to Motorsport Australia standard. Perfect for track days, 4x4's, fleet vehicles, or the daily drive.

SEARCH BY CAR

THREE STEPS TO SAFETY

01

FIND YOUR CAR

Each bracket is vehicle-specific, not universal. Fits perfectly, mounts securely, and looks factory-built. Your extinguisher is instantly accessible. Ready when you need it.

02

FIND YOUR EXTINGUISHER

Race day, road trip or protecting a classic like no other. Choose the right extinguisher for your ride. Pick from one ours or use an extinguisher of your own.

03

BOLT IT IN

Easy to install, under 10 minutes. Bolts straight onto the vehicle's factory seat mounts, no drilling, no damage.

AUSTRALIAN OWNED AND MADE

Kap Industries started in Perth in 2014, out on the track. To take your car out you needed an extinguisher mounted within arm's reach, and there was nothing on the market that didn't require drilling into the car. So Russell built his own. What started as a simple track-day fix grew into Kap Industries.

Quality you can trust

Every bracket is designed and tested by Russell himself. By working with local suppliers, we're able to oversee every step of the process, ensuring the quality of our products is consistent across every bracket.

No drilling, no damage

Designed to bolt in without having to drill into the vehicle's bodywork. Bolts straight onto the factory seat mounts with zero modifications or damage. Suits work, fleet and lease vehicles.

Built to last

Laser cut from steel and powder coated to handle whatever the car does. High tensile M5 hardware and nylock nuts that won't shake loose.

12+

Years in Business

45k

Brackets Sold

20+

Countries Shipped

200

Car Models Developed

4.9/5.0

OVER 1338+ CONFIRMED REVIEWS

Our goal at Kap Industries is to see every car on the road fitted with a fire extinguisher. Our success is only possible because of the customers and community behind us. Don't take our word for it. See for yourself.

SAFETY MADE SIMPLE. EMERGENCY READY.

A fire in your vehicle gives you seconds, not minutes. A properly mounted extinguisher means you're not fumbling for it when it counts. Here are the questions we get asked most.
  • What size extinguisher does the bracket fit?

    Our brackets are designed for 1kg metal cage extinguishers, roughly 80mm x 305mm. They won't suit plastic clip-mount units. If you're using your own, it needs to be a metal-strapped, cage-style unit in that size range, send us the dimensions if you're unsure.

    Need more than 1kg on board? Install two brackets, one on the driver's side and one on the passenger side. Some motorsport categories require a 2kg minimum, and two 1kg units may count toward that, but always check your event regs to confirm what applies to you.

  • My model isn't listed, can you make one?

    Often, yes. We're always adding new models. Our workshop is based in Somerville, VIC, about 50km from Melbourne's CBD, where we measure the vehicle in person and develop a bracket to suit. Unfortunately we're not able to design new brackets from photos alone, so we do need access to the vehicle to measure it properly.

    If you're not based in Victoria, a good option is to see if you know someone with the same model who's nearby and could bring their car in for us to measure. Some customers have organised this through car clubs or owner groups.

    Fill in the details on the contact page.

  • Are these Motorsport Australia approved / legal in racing?

    Yes these are manufactured to Motorsport Australia Specifications. Schedule H 1:1.  HAND-HELD FIRE EXTINGUISHERS: (i) Each hand-held fire extinguisher shall be secured using a metal bracket attached to the automobile with only high tensile bolts or equivalent fasteners and must remain restrained under a deceleration or acceleration of 25G ; and (ii) must be capable of removal by the driver (or crew, where applicable) without the aid of tools. Our brackets are made out Steel and they are supplied with M5 High Tensile Nuts and Bolts and are designed to be attached to the vehicle via the factory High Tensile Factory bolts. 

  • Are these hard to install?

    No these are very easy to install. They can be installed with simple hand tools in only minutes. We provide detailed video instructions for most of our brackets too.

  • Do these cause any damage to the vehicle?

    No not at all. These are all designed to be easily installed and easily removed if the vehicle is sold later on.