1 5

Mazda BT50 2nd Gen (2011-2019) Fire Extinguisher Bracket

Mazda BT50 2nd Gen (2011-2019) Fire Extinguisher Bracket

$63.00 USD
$70.00 USD $63.00 USD
On Sale

Protect your car and stop your fire extinguisher from rolling around the cabin. Precision laser-cut from 3mm Australian steel with a durable powder coat, this bracket keeps your extinguisher locked down solid, instantly accessible when seconds count. Bolts straight on the existing factory seat mounts with zero drilling required. Ideal setup for track days, off-road 4x4s, fleet vehicles, or your daily drive.
  • Made in Australia
  • Free Shipping AU & NZ
  • Model-specific
  • Are these Motorsport Australia approved / legal in racing?

    Yes these are manufactured to Motorsport Australia Specifications. Schedule H 1:1.  HAND-HELD FIRE EXTINGUISHERS: (i) Each hand-held fire extinguisher shall be secured using a metal bracket attached to the automobile with only high tensile bolts or equivalent fasteners and must remain restrained under a deceleration or acceleration of 25G ; and (ii) must be capable of removal by the driver (or crew, where applicable) without the aid of tools. Our brackets are made out Steel and they are supplied with M5 High Tensile Nuts and Bolts and are designed to be attached to the vehicle via the factory High Tensile Factory bolts. 

  • Are these hard to install?

    No these are very easy to install. They can be installed with simple hand tools in only minutes. We provide detailed video instructions for most of our brackets too.

  • Do these cause any damage to the vehicle?

    No not at all. These are all designed to be easily installed and easily removed if the vehicle is sold later on.

  • My model isn't listed, can you make one?

    Often, yes. We're always adding new models. Our workshop is based in Somerville, VIC, about 50km from Melbourne's CBD, where we measure the vehicle in person and develop a bracket to suit. Unfortunately we're not able to design new brackets from photos alone, so we do need access to the vehicle to measure it properly.

    If you're not based in Victoria, a good option is to see if you know someone with the same model who's nearby and could bring their car in for us to measure. Some customers have organised this through car clubs or owner groups.

    Fill in the details on the contact page.

View full details

Fire Extinguisher Bracket designed for BT50 Second Generation 2011-2019! 🧯🔥

Protect your car from a fire with a fast and east to access fire extinguisher. Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle's bodywork.

Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger. 

Quick and easy install in 5 minutes. 

⚠ NOTE: This product may restrict full seat travel. Adjust the seat with care after installation.

    Please watch install video!


    Included in your Mazda BT50 2nd Gen (2011-2019) Fire Extinguisher Bracket purchase:

    Kap Industries [product-name]
    Kap Industries Mazda BT50 2nd Gen (2011-2019) Fire Extinguisher Bracket

    1x Bracket

    M5 High Tensile Steel Locknuts
    M5 High Tensile Steel Locknuts

    2x Locknuts

    M5 High Tensile Steel Hex Bolts
    M5 High Tensile Steel Hex Bolts

    2x Hex Bolts

    M5 Flat Washers
    M5 Flat Washers

    2x Flat Washers

    Sticker
    Sticker

    1x Sticker

    Lifetime Guarantee
    Lifetime Guarantee

    On all brackets

    AUSTRALIAN OWNED AND MADE

    Since 2014, our goal at Kap Industries is to encourage everyone to be more safety-conscious while on the roads – whether it be off-road, on the track or just out and about and to always be ready in case of an accident, fire or emergency.

    12+

    Years in Business

    45k

    Brackets Sold

    20+

    Countries Shipped

    200+

    Car Models Developed

    <span>AUSTRALIAN</span> OWNED AND MADE
    • 5 stars: 9 (90%)
    • 4 stars: 1 (10%)
    • 3 stars: 0 (0%)
    • 2 stars: 0 (0%)
    • 1 star: 0 (0%)
    Some of the reviews shown are from related products the merchant grouped with this one.
    W
    Wongy
    Great Aussie Made Product

    Easy to install, safety close at hand. Hopefully I'll never need to use the extinguishers. Mazda BT50

    Wongy review photo
    P
    Peter

    This is my second one can never have to many and they fit well at the front of the seat

    C
    Corey Wyatt
    Mazda BT50 2nd Gen (2011-2019) Fire Extinguisher Bracket

    Delivery was quick and cant fault the bracket.
    Perfect fit, looks great and tucks away nicely with minimal interruption to the passenger.
    Love your work..

    S
    Stephen Lee
    2018 BT 50

    Great engineered fire extinguisher brackets no drilling great design

    C
    Chris
    2013 BT 50

    Great product, only negative is the price, but no one else is making them.

    C
    Con Zacharias
    Great product

    Easy to install great product good quality highly recommended and you know where your fire extinguisher is all the time 👌

    B
    Brendan

    Fitted well looks clean

    B
    Brendan Adams

    Awesome love how it fits and looks bort one for another car of mine aswell

    P
    Peter

    Good little bracket tucks in nicely and out of the way will have to save up and get one for the other side no cheers

    K
    Karl Fehlauer
    Great bit of kit

    This is my second bracket from Kap Industries and I love it.