Ford Ranger RA 2022+ Next Gen Fire Extinguisher Bracket
Ford Ranger RA 2022+ Next Gen Fire Extinguisher Bracket
Protect your car and stop your fire extinguisher from rolling around the cabin. Precision laser-cut from 3mm Australian steel with a durable powder coat, this bracket keeps your extinguisher locked down solid, instantly accessible when seconds count. Bolts straight on the existing factory seat mounts with zero drilling required. Ideal setup for track days, off-road 4x4s, fleet vehicles, or your daily drive.
Couldn't load pickup availability
Made in Australia
Free Shipping AU & NZ
Model-specific
-
Are these Motorsport Australia approved / legal in racing?
Yes these are manufactured to Motorsport Australia Specifications. Schedule H 1:1. HAND-HELD FIRE EXTINGUISHERS: (i) Each hand-held fire extinguisher shall be secured using a metal bracket attached to the automobile with only high tensile bolts or equivalent fasteners and must remain restrained under a deceleration or acceleration of 25G ; and (ii) must be capable of removal by the driver (or crew, where applicable) without the aid of tools. Our brackets are made out Steel and they are supplied with M5 High Tensile Nuts and Bolts and are designed to be attached to the vehicle via the factory High Tensile Factory bolts.
-
Are these hard to install?
No these are very easy to install. They can be installed with simple hand tools in only minutes. We provide detailed video instructions for most of our brackets too.
-
Do these cause any damage to the vehicle?
No not at all. These are all designed to be easily installed and easily removed if the vehicle is sold later on.
-
My model isn't listed, can you make one?
Often, yes. We're always adding new models. Our workshop is based in Somerville, VIC, about 50km from Melbourne's CBD, where we measure the vehicle in person and develop a bracket to suit. Unfortunately we're not able to design new brackets from photos alone, so we do need access to the vehicle to measure it properly.
If you're not based in Victoria, a good option is to see if you know someone with the same model who's nearby and could bring their car in for us to measure. Some customers have organised this through car clubs or owner groups.
Fill in the details on the contact page.

Fire Extinguisher Bracket designed for the new 2022+ Ford Ranger Including Raptor 🧯🔥
Protect your car from a fire with a fast and east to access fire extinguisher. Every Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle's bodywork.
Designed in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly, does not require any seat adjustment and is non-obtrusive to the driver or passenger.
⚠ NOTE: This product may restrict full seat travel. Adjust the seat with care after installation.
Quick and easy install in 5 minutes.
Included in your Ford Ranger RA 2022+ Next Gen Fire Extinguisher Bracket purchase:
Kap Industries Ford Ranger RA 2022+ Next Gen Fire Extinguisher Bracket
1x Bracket
M5 High Tensile Steel Locknuts
2x Locknuts
M5 High Tensile Steel Hex Bolts
2x Hex Bolts
M5 Flat Washers
2x Flat Washers
Sticker
1x Sticker
Lifetime Guarantee
On all brackets
AUSTRALIAN OWNED AND MADE
Since 2014, our goal at Kap Industries is to encourage everyone to be more safety-conscious while on the roads – whether it be off-road, on the track or just out and about and to always be ready in case of an accident, fire or emergency.
12+
Years in Business
45k
Brackets Sold
20+
Countries Shipped
200+
Car Models Developed
Fits perfectly stops the extinguisher rolling around and is easy access
Great fit, easy install
Great packaging and free sticker
Does the job
easy to fit and install , does the job. I travel with the seat fully back and it protrudes a little more than I would like but I have never tried to investigate why
- 5 stars: 19 (83%)
- 4 stars: 4 (17%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Good fit for driver and passenger side. Need to adjust angle of bracket to accommodate ARB floor mats.
Happy with product and service. 5 stars from me.
Fits perfectly stops the extinguisher rolling around and is easy access
Great fit, easy install
Great packaging and free sticker
Does the job
easy to fit and install , does the job. I travel with the seat fully back and it protrudes a little more than I would like but I have never tried to investigate why
Very good bracket
Ford Ranger RA 2022+ Next Gen Fire Extinguisher Bracket 🌎
Well made bracket that was easy to install and fit well
Only issue I had was that the existing extinguisher bracket got a bit out of shape due to the main rivet that holds the extinguisher bracket together, which made it a bit harder to reinstall the extinguisher
Ford Ranger RA 2022+ Next Gen Fire Extinguisher Bracket
Purchased one as a trial for our work fleet. Amazing. We usually spec the vehicles with a mounted fire extinguisher when purchasing. Not any more. Will be ordering theses for our replacement fleet from now on. So much more secure and a standard location no matter what vehicle my team drives.
Works beautifully
Easy install & fit. Recommend.
Great product,easily fitted. And great after sales service. Strongly recommend this product.
The bracket is amazing great quality perfect fit and looks great in my car. Thank you
Great piece of kit. Well made and fits perfectly
Easy to install great idea
All ok no issues
Great product 👌
Easy to fit at front of passenger seat. Easy to get access to if needed.
Looks great works great
Great fit does not compromise position of seat at all
The brackets came as they appeared on-line. Sturdy construction with all the required fasteners. They were easy to fit and look great in my Next gen Ranger


